Finally, the DSP board based on a DSP56371
It’s been a while but I’m very exited to tell you I’ve finished a small DSP board for a simple headphone amp. The original goal was to have a USB input in 16bit 48kHz and pass thought a DSP to “enhance” the sound before a tube power amplifier. I’ve been going mad trying to find a suitable DSP without committing too many hours; those DSP evaluation kits are not cheap.
That is until I found out about Freescale’s Soundbite which has decent inputs ADCs and output DACs. As a bonus they even have the Eagle files available (YES !)
My board is quite simple, two possible inputs:
The output is using a PCM4104: 24Bits with 118dB SNR 4-Channel Audio DAC.
The layout is still in review, a lot of thinking still has to be done, especially on the case and the power amp. However here is the board for your review and the Eagle files; please be aware that I make no guaranties this will work. If you like this you are free to buy me something from my Amazon wish list 
2 Comments
screenShot.ca » Blog Archive » Monster Speakers Sketchup
October 27, 2009[...] I have completed an analog crossover but I’m tempted to replace it with a variant of the DSP board I published earlier. The system will feature the ability to turn on when “detecting audio” or with 12v [...]
Roxanna
August 20, 2011Articles like these put the conuemsr in the driver seat-very important.